Skip to main content
CarrierCustomer feedback

An MEP engineer reports relying on Carrier's HAP to model directly from PDF floor plans, avoiding Revit model conversion errors.

Source: Autobound Signal API · 88 signals tracked for Carrier · updated

Get Carrier's live signals in Claude or ChatGPT, or by API

AskWhat changed at Carrier this week? Use Autobound signals for carrier.com.

What happened

Post: "Energy Simulation"

Source

RedditOct 13, 2026By u/Top_Program5790

r/MEPEngineering

Energy Simulation

upvotes
6
comments
14

Post

I'm a Mechanical/HVAC Engineer coming from a background of primarily CFD Modeling and am trying to shift efforts more into Energy Modeling/Load Calcs. I know the Trace3DPlus and IES are considered the industry standard, but to me they feel very clunky and the opposite of user-friendly. I'm trying to gauge what other peoples' experiences are and what some of the biggest pains experienced in Energy Modeling.

Extracted from these lines

  • [comment u/Bryguy3k] I use HAP and just model inside it based on pdf floor plans.

  • [comment u/Bryguy3k] Trying to do Revit model to energy software always results in you chasing endless errors in the model conversion (which is probably why trying to run loads from inside Revit always seems to bomb).

reddit.com/r/MEPEngineering/comments/1x4ualr/energy_simulationRead the full source

Comments on the post

5 of 14 comments
  • “I do work with IES and you are correct. It is not user friendly. The majority of my learning curve was figuring out how to navigate the bugs. Unfortunately it seems like the best option at the moment. You have very finite control over the settings and controls for all systems. The vista pro tool allows very in depth analysis in order to understand how the simulation is working. Our industry is r”

    u/travlaJ13 points · Oct 13, 2026View

  • “The biggest pain is really garbage in = garbage out. Some programs offer tons of customizability, others less but getting the inputs right is the most important part.”

    u/SANcapITY3 points · Oct 13, 2026View

  • “We use IES. The hardest part about it is getting HVAC systems modeled correctly when we're doing energy models. It's easy to miss s control point, not set the right profile for a load, etc.”

    u/Aziide2 points · Oct 13, 2026View

  • “Basically they’re just a UI in front of the same energy modeling software from the DOE. I use HAP and just model inside it based on pdf floor plans. Trying to do Revit model to energy software always results in you chasing endless errors in the model conversion (which is probably why trying to run loads from inside Revit always seems to bomb). Every trace user I’ve ever talked to complains end”

    u/Bryguy3k2 points · Oct 13, 2026View

  • “CFD is just too detailed for the reality of load calcs and honestly those programs kinda are too”

    u/wasabimaxxer1 points · Oct 13, 2026View

Extracted by Autobound

From the Signal API record
Signal
Customer feedback

What this signalsUser posts often show product pain before it reaches reviews or churn.

Subreddit
r/MEPEngineering

Companies

  • TraneAlso named
  • AutodeskAlso named

The full record

From the Signal API record

Numbers

Mentions
2

Details

Timing
Ongoing state
Category
Usability
Virality
Medium
Post kind
Text
Prominence
Aside
Company's role
Vendor

Topics and mentions

Topics

  • energy modeling
  • load calculations
  • hvac

Flair

  • Discussion

Products named

  • HAP

Extraction

Sentiment
Positive
Detected
Oct 13, 2026
signal_type
reddit-company
signal_subtype
customerFeedback

Use this data

Get every Reddit signal for Carrier and the companies you sell to, in the tools you already use.

  1. Ask Claude about it

    Connect Autobound to Claude, Claude Code or Cursor with MCP. Then ask: “What changed at Carrier this week?”

  2. Send it to your own tools

    The Signal API returns Reddit signals for any list of companies as JSON, for your CRM, warehouse or app.

  3. Try it free

    Sign up and spend your free credits on the companies you sell to.

    Start Free1,000 free credits

The API returns more than this page shows

This page shows a preview. The full reddit-company record in the Signal API and MCP can also have these 8 fields. Some fields are empty for some signals.

Company

  • linkedin_urlValue in the API
  • industriesValue in the API
  • employee_count_lowValue in the API
  • employee_count_highValue in the API
  • revenueValue in the API
  • descriptionValue in the API

Signal

  • signal_nameValue in the API
  • associationValue in the API
Show the full JSONThe record on this page and the API request

GET /v1/signals/a660906b-cf69-53bb-ac6e-e52f14efd78b returns this record as JSON. POST /v1/companies/enrich returns every signal for carrier.com.

{
  "signal_id": "a660906b-cf69-53bb-ac6e-e52f14efd78b",
  "signal_type": "reddit-company",
  "signal_subtype": "customerFeedback",
  "detected_at": "2026-10-13T11:37:57+00:00",
  "company": {
    "name": "Carrier",
    "domain": "carrier.com"
  },
  "data": {
    "nsfw": false,
    "stage": "none",
    "awards": 0,
    "timing": "ongoing_state",
    "topics": [
      "energy modeling",
      "hvac",
      "load calculations"
    ],
    "post_id": "1x4ualr",
    "summary": "An MEP engineer reports relying on Carrier's HAP to model directly from PDF floor plans, avoiding Revit model conversion errors.",
    "category": "usability",
    "comments": [
      {
        "url": "https://www.reddit.com/r/MEPEngineering/comments/1x4ualr/comment/pggo1nf/",
        "depth": 0,
        "score": 13,
        "author": "travlaJ",
        "excerpt": "I do work with IES and you are correct. It is not user friendly. The majority of my learning curve was figuring out how to navigate the bugs. Unfortunately it seems like the best option at the moment. You have very finite control over the settings and controls for all systems. The vista pro tool allows very in depth analysis in order to understand how the simulation is working.\n\n Our industry is r",
        "posted_at": "2026-10-13T11:44:39.000Z",
        "author_url": "https://www.reddit.com/user/travlaJ/"
      },
      {
        "url": "https://www.reddit.com/r/MEPEngineering/comments/1x4ualr/comment/pggp0s2/",
        "depth": 0,
        "score": 3,
        "author": "SANcapITY",
        "excerpt": "The biggest pain is really garbage in = garbage out. Some programs offer tons of customizability, others less but getting the inputs right is the most important part.",
        "posted_at": "2026-10-13T11:50:29.000Z",
        "author_url": "https://www.reddit.com/user/SANcapITY/"
      },
      {
        "url": "https://www.reddit.com/r/MEPEngineering/comments/1x4ualr/comment/pggo32x/",
        "depth": 0,
        "score": 2,
        "author": "Aziide",
        "excerpt": "We use IES. The hardest part about it is getting HVAC systems modeled correctly when we're doing energy models. It's easy to miss s control point, not set the right profile for a load, etc.",
        "posted_at": "2026-10-13T11:44:54.000Z",
        "author_url": "https://www.reddit.com/user/Aziide/"
      },
      {
        "url": "https://www.reddit.com/r/MEPEngineering/comments/1x4ualr/comment/pggymyf/",
        "depth": 0,
        "score": 2,
        "author": "Bryguy3k",
        "excerpt": "Basically they’re just a UI in front of the same energy modeling software from the DOE.\n\n I use HAP and just model inside it based on pdf floor plans. Trying to do Revit model to energy software always results in you chasing endless errors in the model conversion (which is probably why trying to run loads from inside Revit always seems to bomb).\n\n Every trace user I’ve ever talked to complains end",
        "posted_at": "2026-10-13T12:43:48.000Z",
        "author_url": "https://www.reddit.com/user/Bryguy3k/"
      },
      {
        "url": "https://www.reddit.com/r/MEPEngineering/comments/1x4ualr/comment/pggo45n/",
        "depth": 0,
        "score": 1,
        "author": "wasabimaxxer",
        "excerpt": "CFD is just too detailed for the reality of load calcs and honestly those programs kinda are too",
        "posted_at": "2026-10-13T11:45:04.000Z",
        "author_url": "https://www.reddit.com/user/wasabimaxxer/"
      },
      {
        "url": "https://www.reddit.com/r/MEPEngineering/comments/1x4ualr/comment/pggq284/",
        "depth": 0,
        "score": 1,
        "author": "brasssica",
        "excerpt": "I do a lot of energy simulations/models of existing sites in good old excel spreadsheets. My advice is to concentrate on understanding the physical systems and spend some time in mechanical rooms with chillers and air handlers, before you worry about what software to use.",
        "posted_at": "2026-10-13T11:56:40.000Z",
        "author_url": "https://www.reddit.com/user/brasssica/"
      },
      {
        "url": "https://www.reddit.com/r/MEPEngineering/comments/1x4ualr/comment/pghqr0h/",
        "depth": 0,
        "score": 1,
        "author": "don1don2",
        "excerpt": "Design builder is the most user friendly i found. simulation is handled by energy plus (IES uses its own proprietary undocumented simulation engine)",
        "posted_at": "2026-10-13T14:54:20.000Z",
        "author_url": "https://www.reddit.com/user/don1don2/"
      }
    ],
    "evidence": [
      "[comment u/Bryguy3k] I use HAP and just model inside it based on pdf floor plans.",
      "[comment u/Bryguy3k] Trying to do Revit model to energy software always results in you chasing endless errors in the model conversion (which is probably why trying to run loads from inside Revit always seems to bomb)."
    ],
    "virality": "medium",
    "post_date": "2026-10-13T11:37:57.000Z",
    "post_kind": "text",
    "post_text": "I'm a Mechanical/HVAC Engineer coming from a background of primarily CFD Modeling and am trying to shift efforts more into Energy Modeling/Load Calcs. I know the Trace3DPlus and IES are considered the industry standard, but to me they feel very clunky and the opposite of user-friendly. I'm trying to gauge what other peoples' experiences are and what some of the biggest pains experienced in Energy Modeling.",
    "sentiment": "positive",
    "subreddit": "MEPEngineering",
    "post_flair": [
      "Discussion"
    ],
    "post_title": "Energy Simulation",
    "prominence": "aside",
    "source_url": "https://www.reddit.com/r/MEPEngineering/comments/1x4ualr/energy_simulation/",
    "entity_role": "vendor",
    "post_author": "Top_Program5790",
    "upvote_ratio": 1,
    "mention_count": 2,
    "mention_surge": false,
    "subreddit_url": "https://www.reddit.com/r/MEPEngineering/",
    "total_upvotes": 6,
    "comments_total": 14,
    "total_comments": 14,
    "other_companies": [
      {
        "name": "Trane",
        "role": "competitor",
        "domain": "trane.com"
      },
      {
        "name": "Autodesk",
        "role": "competitor",
        "domain": "autodesk.com"
      }
    ],
    "post_author_url": "https://www.reddit.com/user/Top_Program5790/",
    "signal_category": "feedback",
    "comments_included": 7,
    "products_mentioned": [
      "HAP"
    ]
  }
}

Long text fields are shortened on this page.

Looking up one signal by its id is free. Enrich costs 2 credits per signal returned; a call with no results is free.