Skip to main content
GeneracCustomer feedback

A customer reports experiencing multiple engine stalls and E1900 UV trips on a 26kW Generac standby generator due to an unlanded emergency power coil lead and a fuel conversion knob misconfigured...

Source: Autobound Signal API · 78 signals tracked for Generac · updated

Get Generac's live signals in Claude or ChatGPT, or by API

AskWhat changed at Generac this week? Use Autobound signals for generac.com.

What happened

A customer reports experiencing multiple engine stalls and E1900 UV trips on a 26kW Generac standby generator due to an unlanded emergency power coil lead and a fuel conversion knob misconfigured to natural gas instead of LP.

Source

RedditAug 30, 2026By u/dontfeedthecucoos

r/Generator

Generac installation errors

upvotes
3
comments
5

Post

Highlighted: the lines this signal was extracted from

I had a 26kw whole house standby generator installed last February, fueled with LP, with two separate transfer switches for the house. It ran for the first time for a power loss this morning, which revealed some issues. One of the leads for the emergency power coil on one of the transfer switches wasn’t landed, so half the house was in the dark. I found and corrected that. Then I found that the generator fuel conversion knob was set to natural gas (after multiple engine stalls and E1900 UV trips). I just corrected that, but does the generator need tuning or any other service after the change in the fuel conversion knob? Considering having the installer come back out and repeat functional testing on the generator.

reddit.com/r/Generator/comments/1w2spp5/generac_installation_errorsRead the full source

Comments on the post

4 of 5 comments
  • “Sounds like a pretty sloppy install & checkout procedure. Considering the amount of money OP probably paid for that setup he certainly deserves better. Fortunately, he was handy enough to fix the installer's mistakes. It might pay to look for other neglected and slopped together stuff on the unit.”

    u/DaveBowm2 points · Aug 30, 2026View

  • “If it’s running fine after fuel conversion don’t worry about it. Get the valves set and oil changed at 25 hours for warranty purposes(the valves will continue to walk within 100 hour) and you’ll be fine most likely. I’m assuming you’re talking about the spade connectors in the transfer switch on the emergency coil. They’re very common to be loose that includes both coils if it wasn’t obvious. The”

    u/Alert-Effect1901 points · Aug 30, 2026View

  • “Testing inches of the water column and then checking your connections for 194 and 23 in the transfer switch with I believe power the coil for switching between gen and utility”

    u/Shitmongaloid1 points · Aug 30, 2026View

  • “Verification of function was never done Also not sure if this is a setting on this generator. Set return to utility power to at least for 20 minutes. Sometimes power goes out and comes back sometimes several. You dont want to switch back to utility power unless it’s stable. Switching back and forth multiple times is bad for the system”

    u/New-Swim-85511 points · Aug 31, 2026View

Extracted by Autobound

From the Signal API record
Signal
Customer feedback

What this signalsUser posts often show product pain before it reaches reviews or churn.

Subreddit
r/Generator
Event date
Aug 2026

The full record

From the Signal API record

Numbers

Mentions
1

Details

Timing
Ongoing state
Category
Implementation
Link URL
i.redd.it
Virality
Low
Post kind
Image
Prominence
Core
Company's role
Vendor

Topics and mentions

Topics

  • generators
  • installation
  • reliability

Products named

  • 26kw whole house standby generator

Extraction

Sentiment
Negative
Detected
Aug 30, 2026
signal_type
reddit-company
signal_subtype
customerFeedback

Use this data

Get every Reddit signal for Generac and the companies you sell to, in the tools you already use.

  1. Ask Claude about it

    Connect Autobound to Claude, Claude Code or Cursor with MCP. Then ask: “What changed at Generac this week?”

  2. Send it to your own tools

    The Signal API returns Reddit signals for any list of companies as JSON, for your CRM, warehouse or app.

  3. Try it free

    Sign up and spend your free credits on the companies you sell to.

    Start Free1,000 free credits

The API returns more than this page shows

This page shows a preview. The full reddit-company record in the Signal API and MCP can also have these 8 fields. Some fields are empty for some signals.

Company

  • linkedin_urlValue in the API
  • industriesValue in the API
  • employee_count_lowValue in the API
  • employee_count_highValue in the API
  • revenueValue in the API
  • descriptionValue in the API

Signal

  • signal_nameValue in the API
  • associationValue in the API
Show the full JSONThe record on this page and the API request

GET /v1/signals/5de2edec-fce3-5fa8-a2ec-7b2c6e0284a0 returns this record as JSON. POST /v1/companies/enrich returns every signal for generac.com.

{
  "signal_id": "5de2edec-fce3-5fa8-a2ec-7b2c6e0284a0",
  "signal_type": "reddit-company",
  "signal_subtype": "customerFeedback",
  "detected_at": "2026-08-30T20:37:57+00:00",
  "company": {
    "name": "Generac",
    "domain": "generac.com"
  },
  "data": {
    "nsfw": false,
    "stage": "none",
    "awards": 0,
    "timing": "ongoing_state",
    "topics": [
      "generators",
      "installation",
      "reliability"
    ],
    "post_id": "1w2spp5",
    "summary": "A customer reports experiencing multiple engine stalls and E1900 UV trips on a 26kW Generac standby generator due to an unlanded emergency power coil lead and a fuel conversion knob misconfigured to natural gas instead of LP.",
    "category": "implementation",
    "comments": [
      {
        "url": "https://www.reddit.com/r/Generator/comments/1w2spp5/comment/p6w0ck5/",
        "depth": 0,
        "score": 2,
        "author": "DaveBowm",
        "excerpt": "Sounds like a pretty sloppy install & checkout procedure. Considering the amount of money OP probably paid for that setup he certainly deserves better.\n\n Fortunately, he was handy enough to fix the installer's mistakes.\n\n It might pay to look for other neglected and slopped together stuff on the unit.",
        "posted_at": "2026-08-30T23:51:48.000Z",
        "author_url": "https://www.reddit.com/user/DaveBowm/"
      },
      {
        "url": "https://www.reddit.com/r/Generator/comments/1w2spp5/comment/p6viwaf/",
        "depth": 0,
        "score": 1,
        "author": "Alert-Effect190",
        "excerpt": "If it’s running fine after fuel conversion don’t worry about it. Get the valves set and oil changed at 25 hours for warranty purposes(the valves will continue to walk within 100 hour) and you’ll be fine most likely. I’m assuming you’re talking about the spade connectors in the transfer switch on the emergency coil. They’re very common to be loose that includes both coils if it wasn’t obvious. The",
        "posted_at": "2026-08-30T22:13:32.000Z",
        "author_url": "https://www.reddit.com/user/Alert-Effect190/"
      },
      {
        "url": "https://www.reddit.com/r/Generator/comments/1w2spp5/comment/p6v0npn/",
        "depth": 0,
        "score": 1,
        "author": "Shitmongaloid",
        "excerpt": "Testing inches of the water column and then checking your connections for 194 and 23 in the transfer switch with I believe power the coil for switching between gen and utility",
        "posted_at": "2026-08-30T20:40:49.000Z",
        "author_url": "https://www.reddit.com/user/Shitmongaloid/"
      },
      {
        "url": "https://www.reddit.com/r/Generator/comments/1w2spp5/comment/p6zdb0i/",
        "depth": 0,
        "score": 1,
        "author": "New-Swim-8551",
        "excerpt": "Verification of function was never done\n\n Also not sure if this is a setting on this generator. Set return to utility power to at least for 20 minutes. Sometimes power goes out and comes back sometimes several. You dont want to switch back to utility power unless it’s stable.\n\n Switching back and forth multiple times is bad for the system",
        "posted_at": "2026-08-31T13:59:08.000Z",
        "author_url": "https://www.reddit.com/user/New-Swim-8551/"
      }
    ],
    "evidence": [
      "[post] I had a 26kw whole house standby generator installed last February, fueled with LP, with two separate transfer switches for the house. It ran for the first time for a power loss this morning, which revealed some issues.",
      "[post] Then I found that the generator fuel conversion knob was set to natural gas (after multiple engine stalls and E1900 UV trips)."
    ],
    "link_url": "https://i.redd.it/r739kptkpkmh1.jpeg",
    "virality": "low",
    "image_url": "https://i.redd.it/r739kptkpkmh1.jpeg",
    "post_date": "2026-08-30T20:37:57.000Z",
    "post_kind": "image",
    "post_text": "I had a 26kw whole house standby generator installed last February, fueled with LP, with two separate transfer switches for the house. It ran for the first time for a power loss this morning, which revealed some issues. One of the leads for the emergency power coil on one of the transfer switches wasn’t landed, so half the house was in the dark. I found and corrected that. Then I found that the generator fuel conversion knob was set to natural gas (after multiple engine stalls and E1900 UV trips). I just corrected that, but does the generator need tuning or any other service after the change in the fuel conversion knob? Considering having the installer come back out and repeat functional testing on the generator.",
    "sentiment": "negative",
    "subreddit": "Generator",
    "event_date": "2026-08",
    "post_title": "Generac installation errors",
    "prominence": "core",
    "source_url": "https://www.reddit.com/r/Generator/comments/1w2spp5/generac_installation_errors/",
    "entity_role": "vendor",
    "post_author": "dontfeedthecucoos",
    "upvote_ratio": 0.8,
    "mention_count": 1,
    "mention_surge": false,
    "subreddit_url": "https://www.reddit.com/r/Generator/",
    "total_upvotes": 3,
    "comments_total": 5,
    "total_comments": 5,
    "event_date_text": "this morning",
    "post_author_url": "https://www.reddit.com/user/dontfeedthecucoos/",
    "signal_category": "feedback",
    "comments_included": 4,
    "products_mentioned": [
      "26kw whole house standby generator"
    ]
  }
}

Long text fields are shortened on this page.

Looking up one signal by its id is free. Enrich costs 2 credits per signal returned; a call with no results is free.