Skip to main content
IKEACustomer feedback

A homeowner reports that their new IKEA cabinets look great and sturdy, but expresses concern over mounting hardware and screw gauge compatibility with IKEA suspension rails.

Source: Autobound Signal API · 119 signals tracked for IKEA · updated

Get IKEA's live signals in Claude or ChatGPT, or by API

AskWhat changed at IKEA this week? Use Autobound signals for ikea.com.

What happened

Post: "IKEA Cabinet Installation Troubles..?"

Source

RedditAug 30, 2026By u/GloomyServe

r/cabinetry

IKEA Cabinet Installation Troubles..?

upvotes
1
comments
20

Post

Highlighted: the lines this signal was extracted from

So my husband has been hanging our new ikea cabinets this past week and they look great and seem sturdy, but we just discovered that he was using the wrong screws this whole time. He was using 2” sheet metal screws… We just realized and are now pretty concerned about what to do and the structural integrity of these cabinets. Google AI summaries say different things constantly and I was hoping to get some professional opinions. He used a 12 gauge and google says that 14 gauge is too big for the ikea suspension rails. He was considering replacing the screws with the same gauge cabinet screws that are 3 inch long but I just worry that the screws have torn up in the interior of the wood a bit and taking them out will make it more unstable. Any advice? Please be gentle:(

reddit.com/r/cabinetry/comments/1w2op97/ikea_cabinet_installation_tro...Read the full source

Comments on the post

4 of 20 comments
  • “2 1/2 inch. Any longer and you run the risk of hitting electrical wires in the middle of a 3 1/2 inch wide stud”

    u/fijimann2 points · Aug 30, 2026View

  • “2 1/2 in.² shank number two screws designed to hang cabinets on the wall should be more than adequate if you’re going through a thicker back cabinet then you might want to use a 2 in.² shank 3 inch long screw”

    u/cabinetrick1 points · Aug 31, 2026View

  • “I might do the next size up screw and a longer thread. Like a #9 or #10 x 2 1/2". If you know there is no wiring I would do 3 1/8" which is pretty common.”

    u/Different-Side52621 points · Aug 30, 2026View

  • “2” is a bit on the smaller side, I almost always use 2 1/2. However if you put up a suitable amount of pressure on the uppers and feel no shifting, y’all should be fine.”

    u/Mrmoosestuff1 points · Aug 30, 2026View

Extracted by Autobound

From the Signal API record
Signal
Customer feedback

What this signalsUser posts often show product pain before it reaches reviews or churn.

Subreddit
r/cabinetry
Event date
Aug 2026

The full record

From the Signal API record

Numbers

Mentions
1

Details

Timing
Ongoing state
Category
Usability
Virality
Low
Post kind
Text
Prominence
Core
Company's role
Vendor

Topics and mentions

Topics

  • cabinetry
  • installation
  • hardware

Flair

  • Homeowner With Questions

Products named

  • suspension rails

Extraction

Sentiment
Neutral
Detected
Aug 30, 2026
signal_type
reddit-company
signal_subtype
customerFeedback

Use this data

Get every Reddit signal for IKEA and the companies you sell to, in the tools you already use.

  1. Ask Claude about it

    Connect Autobound to Claude, Claude Code or Cursor with MCP. Then ask: “What changed at IKEA this week?”

  2. Send it to your own tools

    The Signal API returns Reddit signals for any list of companies as JSON, for your CRM, warehouse or app.

  3. Try it free

    Sign up and spend your free credits on the companies you sell to.

    Start Free1,000 free credits

The API returns more than this page shows

This page shows a preview. The full reddit-company record in the Signal API and MCP can also have these 8 fields. Some fields are empty for some signals.

Company

  • linkedin_urlValue in the API
  • industriesValue in the API
  • employee_count_lowValue in the API
  • employee_count_highValue in the API
  • revenueValue in the API
  • descriptionValue in the API

Signal

  • signal_nameValue in the API
  • associationValue in the API
Show the full JSONThe record on this page and the API request

GET /v1/signals/6db76ae2-c547-5348-ada3-6bd4cf052037 returns this record as JSON. POST /v1/companies/enrich returns every signal for ikea.com.

{
  "signal_id": "6db76ae2-c547-5348-ada3-6bd4cf052037",
  "signal_type": "reddit-company",
  "signal_subtype": "customerFeedback",
  "detected_at": "2026-08-30T18:06:49+00:00",
  "company": {
    "name": "IKEA",
    "domain": "ikea.com"
  },
  "data": {
    "nsfw": false,
    "stage": "none",
    "awards": 0,
    "timing": "ongoing_state",
    "topics": [
      "cabinetry",
      "installation",
      "hardware"
    ],
    "post_id": "1w2op97",
    "summary": "A homeowner reports that their new IKEA cabinets look great and sturdy, but expresses concern over mounting hardware and screw gauge compatibility with IKEA suspension rails.",
    "category": "usability",
    "comments": [
      {
        "url": "https://www.reddit.com/r/cabinetry/comments/1w2op97/comment/p6uddt1/",
        "depth": 0,
        "score": 2,
        "author": "fijimann",
        "excerpt": "2 1/2 inch. Any longer and you run the risk of hitting electrical wires in the middle of a 3 1/2 inch wide stud",
        "posted_at": "2026-08-30T18:51:25.000Z",
        "author_url": "https://www.reddit.com/user/fijimann/"
      },
      {
        "url": "https://www.reddit.com/r/cabinetry/comments/1w2op97/comment/p6w8nnd/",
        "depth": 0,
        "score": 1,
        "author": "cabinetrick",
        "excerpt": "2 1/2 in.² shank number two screws designed to hang cabinets on the wall should be more than adequate if you’re going through a thicker back cabinet then you might want to use a 2 in.² shank 3 inch long screw",
        "posted_at": "2026-08-31T00:40:52.000Z",
        "author_url": "https://www.reddit.com/user/cabinetrick/"
      },
      {
        "url": "https://www.reddit.com/r/cabinetry/comments/1w2op97/comment/p6vj2ub/",
        "depth": 0,
        "score": 1,
        "author": "Different-Side5262",
        "excerpt": "I might do the next size up screw and a longer thread.\n\n Like a #9 or #10 x 2 1/2\".\n\n If you know there is no wiring I would do 3 1/8\" which is pretty common.",
        "posted_at": "2026-08-30T22:14:31.000Z",
        "author_url": "https://www.reddit.com/user/Different-Side5262/"
      },
      {
        "url": "https://www.reddit.com/r/cabinetry/comments/1w2op97/comment/p6u6fgx/",
        "depth": 0,
        "score": 1,
        "author": "Mrmoosestuff",
        "excerpt": "2” is a bit on the smaller side, I almost always use 2 1/2. However if you put up a suitable amount of pressure on the uppers and feel no shifting, y’all should be fine.",
        "posted_at": "2026-08-30T18:19:58.000Z",
        "author_url": "https://www.reddit.com/user/Mrmoosestuff/"
      }
    ],
    "evidence": [
      "[post] So my husband has been hanging our new ikea cabinets this past week and they look great and seem sturdy, but we just discovered that he was using the wrong screws this whole time.",
      "[post] He used a 12 gauge and google says that 14 gauge is too big for the ikea suspension rails."
    ],
    "virality": "low",
    "post_date": "2026-08-30T18:06:49.000Z",
    "post_kind": "text",
    "post_text": "So my husband has been hanging our new ikea cabinets this past week and they look great and seem sturdy, but we just discovered that he was using the wrong screws this whole time. He was using 2” sheet metal screws… We just realized and are now pretty concerned about what to do and the structural integrity of these cabinets. Google AI summaries say different things constantly and I was hoping to get some professional opinions. He used a 12 gauge and google says that 14 gauge is too big for the ikea suspension rails. \n\nHe was considering replacing the screws with the same gauge cabinet screws that are 3 inch long but I just worry that the screws have torn up in the interior of the wood a bit and taking them out will make it more unstable. \n\nAny advice? \nPlease be gentle :(",
    "sentiment": "neutral",
    "subreddit": "cabinetry",
    "event_date": "2026-08",
    "post_flair": [
      "Homeowner With Questions"
    ],
    "post_title": "IKEA Cabinet Installation Troubles..?",
    "prominence": "core",
    "source_url": "https://www.reddit.com/r/cabinetry/comments/1w2op97/ikea_cabinet_installation_troubles/",
    "entity_role": "vendor",
    "post_author": "GloomyServe",
    "upvote_ratio": 0.57,
    "mention_count": 1,
    "mention_surge": false,
    "subreddit_url": "https://www.reddit.com/r/cabinetry/",
    "total_upvotes": 1,
    "comments_total": 20,
    "total_comments": 20,
    "event_date_text": "this past week",
    "post_author_url": "https://www.reddit.com/user/GloomyServe/",
    "signal_category": "feedback",
    "comments_included": 4,
    "products_mentioned": [
      "suspension rails"
    ]
  }
}

Long text fields are shortened on this page.

Looking up one signal by its id is free. Enrich costs 2 credits per signal returned; a call with no results is free.