Skip to main content
PTCBuying intent

A 9-person satellite engineering team is evaluating PTC Windchill for their first PLM system to track part numbers and BOM revisions.

Source: Autobound Signal API · 86 signals tracked for PTC · updated

Get PTC's live signals in Claude or ChatGPT, or by API

AskWhat changed at PTC this week? Use Autobound signals for ptc.com.

What happened

Post: "weighing Duro vs PTC Windchill for our first PLM on a nine person satellite team"

Source

RedditOct 9, 2026By u/theJacofalltrades

r/AerospaceEngineering

weighing Duro vs PTC Windchill for our first PLM on a nine person satellite team

upvotes
5
comments
7

Post

Highlighted: the lines this signal was extracted from

The spreadsheet that holds our part numbers finally fell over and i got handed the replacement. im looking at Duro, PTC Windchill and Arena. the thing i keep running into is who administers it. our CM already runs one of them so those files would land in the right place. the smaller ones look faster to stand up but i do not know how they hold once the BOM has a few hundred lines and two revisions in flight. we also need to say which revision flew on which unit. for anyone on a team under twenty people, which one did you not regret after the first year?

reddit.com/r/AerospaceEngineering/comments/1x1891h/weighing_duro_vs_p...Read the full source

Comments on the post

5 of 7 comments
  • “Oooooffff. Good luck. Be decisive and move forward and do your best. I don’t know those product but I can say you should really consider not trying to revision track. Change part numbers when a change in something matters. Everything in this realm is give and take. There are costs to trying to enforce revisions. There are costs to changing part numbers when you otherwise would’ve just revised.”

    u/notsurwhybutimhere2 points · Oct 9, 2026View

  • “Picking to match your CM matters less than you think. Most of them take a STEP package and a PDF drawing set out of whatever you use.”

    u/SammuelNash1 points · Oct 9, 2026View

  • “Try thinking about implementing cm2 in your workflow, since now it will be the least amount of pain to implement.”

    u/neknilk1321 points · Oct 9, 2026View

  • “Avoid DURO. They don’t support rev control on drawings.”

    u/Sea_Place13861 points · Oct 9, 2026View

  • “The admin question is the right one. the big system assume somebody owns the tool as part of their job,and on a nine person team that is you. ask each of them how many implementation hours they are quoting before you look at license cost.”

    u/Slap_Ass_Addict1 points · Oct 9, 2026View

Extracted by Autobound

From the Signal API record
Signal
Buying intent

What this signalsUser posts often show product pain before it reaches reviews or churn.

Subreddit
r/AerospaceEngineering
Stage
Evaluating
Event date
Oct 2026

Companies

  • DuroAlso named
  • ArenaAlso named

The full record

From the Signal API record

Numbers

Mentions
1

Details

Timing
In progress
Category
PLM
Virality
Low
Post kind
Text
Prominence
Core
Company's role
Vendor

Topics and mentions

Topics

  • aerospace
  • plm
  • cad

Flair

  • Discussion

Products named

  • Windchill

Extraction

Sentiment
Neutral
Detected
Oct 9, 2026
signal_type
reddit-company
signal_subtype
buyingIntent

Use this data

Get every Reddit signal for PTC and the companies you sell to, in the tools you already use.

  1. Ask Claude about it

    Connect Autobound to Claude, Claude Code or Cursor with MCP. Then ask: “What changed at PTC this week?”

  2. Send it to your own tools

    The Signal API returns Reddit signals for any list of companies as JSON, for your CRM, warehouse or app.

  3. Try it free

    Sign up and spend your free credits on the companies you sell to.

    Start Free1,000 free credits

The API returns more than this page shows

This page shows a preview. The full reddit-company record in the Signal API and MCP can also have these 8 fields. Some fields are empty for some signals.

Company

  • linkedin_urlValue in the API
  • industriesValue in the API
  • employee_count_lowValue in the API
  • employee_count_highValue in the API
  • revenueValue in the API
  • descriptionValue in the API

Signal

  • signal_nameValue in the API
  • associationValue in the API
Show the full JSONThe record on this page and the API request

GET /v1/signals/836aafea-d7f4-51f4-a077-63d976c2acc2 returns this record as JSON. POST /v1/companies/enrich returns every signal for ptc.com.

{
  "signal_id": "836aafea-d7f4-51f4-a077-63d976c2acc2",
  "signal_type": "reddit-company",
  "signal_subtype": "buyingIntent",
  "detected_at": "2026-10-09T01:13:29+00:00",
  "company": {
    "name": "PTC",
    "domain": "ptc.com"
  },
  "data": {
    "nsfw": false,
    "stage": "evaluating",
    "awards": 0,
    "timing": "in_progress",
    "topics": [
      "plm",
      "aerospace",
      "cad"
    ],
    "post_id": "1x1891h",
    "summary": "A 9-person satellite engineering team is evaluating PTC Windchill for their first PLM system to track part numbers and BOM revisions.",
    "category": "PLM",
    "comments": [
      {
        "url": "https://www.reddit.com/r/AerospaceEngineering/comments/1x1891h/comment/pesyto7/",
        "depth": 0,
        "score": 2,
        "author": "notsurwhybutimhere",
        "excerpt": "Oooooffff. Good luck. Be decisive and move forward and do your best.\n\n I don’t know those product but I can say you should really consider not trying to revision track. Change part numbers when a change in something matters.\n\n Everything in this realm is give and take. There are costs to trying to enforce revisions. There are costs to changing part numbers when you otherwise would’ve just revised.",
        "posted_at": "2026-10-09T07:43:53.000Z",
        "author_url": "https://www.reddit.com/user/notsurwhybutimhere/"
      },
      {
        "url": "https://www.reddit.com/r/AerospaceEngineering/comments/1x1891h/comment/pex2e4y/",
        "depth": 0,
        "score": 1,
        "author": "SammuelNash",
        "excerpt": "Picking to match your CM matters less than you think. Most of them take a STEP package and a PDF drawing set out of whatever you use.",
        "posted_at": "2026-10-09T20:10:43.000Z",
        "author_url": "https://www.reddit.com/user/SammuelNash/"
      },
      {
        "url": "https://www.reddit.com/r/AerospaceEngineering/comments/1x1891h/comment/pex660g/",
        "depth": 0,
        "score": 1,
        "author": "neknilk132",
        "excerpt": "Try thinking about implementing cm2 in your workflow, since now it will be the least amount of pain to implement.",
        "posted_at": "2026-10-09T20:27:18.000Z",
        "author_url": "https://www.reddit.com/user/neknilk132/"
      },
      {
        "url": "https://www.reddit.com/r/AerospaceEngineering/comments/1x1891h/comment/pexecv2/",
        "depth": 0,
        "score": 1,
        "author": "Sea_Place1386",
        "excerpt": "Avoid DURO. They don’t support rev control on drawings.",
        "posted_at": "2026-10-09T21:03:47.000Z",
        "author_url": "https://www.reddit.com/user/Sea_Place1386/"
      },
      {
        "url": "https://www.reddit.com/r/AerospaceEngineering/comments/1x1891h/comment/pexhep7/",
        "depth": 0,
        "score": 1,
        "author": "Slap_Ass_Addict",
        "excerpt": "The admin question is the right one. the big system assume somebody owns the tool as part of their job,and on a nine person team that is you. ask each of them how many implementation hours they are quoting before you look at license cost.",
        "posted_at": "2026-10-09T21:18:01.000Z",
        "author_url": "https://www.reddit.com/user/Slap_Ass_Addict/"
      },
      {
        "url": "https://www.reddit.com/r/AerospaceEngineering/comments/1x1891h/comment/pez4kkh/",
        "depth": 0,
        "score": 1,
        "author": "LankyCalendar9299",
        "excerpt": "I use windchill at work, which is nice because it integrates with Creo if you use that, but we also just basically use it as a filing system for our cad files, not so much for BOMs or anything like that.",
        "posted_at": "2026-10-10T02:46:27.000Z",
        "author_url": "https://www.reddit.com/user/LankyCalendar9299/"
      },
      {
        "url": "https://www.reddit.com/r/AerospaceEngineering/comments/1x1891h/comment/peuw4lv/",
        "depth": 0,
        "score": 0,
        "author": "Logical_Fisherman4",
        "excerpt": "All pdm sucks, get the cheap one",
        "posted_at": "2026-10-09T14:42:38.000Z",
        "author_url": "https://www.reddit.com/user/Logical_Fisherman4/"
      }
    ],
    "evidence": [
      "[post] weighing Duro vs PTC Windchill for our first PLM on a nine person satellite team",
      "[post] im looking at Duro, PTC Windchill and Arena. the thing i keep running into is who administers it."
    ],
    "virality": "low",
    "post_date": "2026-10-09T01:13:29.000Z",
    "post_kind": "text",
    "post_text": "The spreadsheet that holds our part numbers finally fell over and i got handed the replacement. im looking at Duro, PTC Windchill and Arena. the thing i keep running into is who administers it. our CM already runs one of them so those files would land in the right place. the smaller ones look faster to stand up but i do not know how they hold once the BOM has a few hundred lines and two revisions in flight. we also need to say which revision flew on which unit. for anyone on a team under twenty people, which one did you not regret after the first year?",
    "sentiment": "neutral",
    "subreddit": "AerospaceEngineering",
    "event_date": "2026-10",
    "post_flair": [
      "Discussion"
    ],
    "post_title": "weighing Duro vs PTC Windchill for our first PLM on a nine person satellite team",
    "prominence": "core",
    "source_url": "https://www.reddit.com/r/AerospaceEngineering/comments/1x1891h/weighing_duro_vs_ptc_windchill_for_our_first_plm/",
    "entity_role": "vendor",
    "post_author": "theJacofalltrades",
    "upvote_ratio": 1,
    "mention_count": 1,
    "mention_surge": false,
    "subreddit_url": "https://www.reddit.com/r/AerospaceEngineering/",
    "total_upvotes": 5,
    "comments_total": 7,
    "total_comments": 7,
    "other_companies": [
      {
        "name": "Duro",
        "role": "competitor",
        "domain": "durolabs.co"
      },
      {
        "name": "Arena",
        "role": "competitor",
        "domain": "arena.ai"
      }
    ],
    "post_author_url": "https://www.reddit.com/user/theJacofalltrades/",
    "signal_category": "intent",
    "comments_included": 7,
    "products_mentioned": [
      "Windchill"
    ]
  }
}

Long text fields are shortened on this page.

Looking up one signal by its id is free. Enrich costs 2 credits per signal returned; a call with no results is free.