Skip to main content
Pure StorageCustomer feedback

A commenter notes that SANs from vendors like Pure Storage support dedupe and unmap features, relevant to a technical discussion on Proxmox migrations.

Source: Autobound Signal API · 53 signals tracked for Pure Storage · updated

Get Pure Storage's live signals in Claude or ChatGPT, or by API

AskWhat changed at Pure Storage this week? Use Autobound signals for purestorage.com.

What happened

Post: "Vmware to Proxmox"

Source

RedditSep 28, 2026By u/Laroemwen

r/Proxmox

Vmware to Proxmox

upvotes
41
comments
22

Post

Like a lot of people I'm currently in process of testing ESXI to Proxmox migrations using the built-in import tool which has been working great for the few test VMs migrated so far. Couple of questions: Running ISCSI + LVM on Proxmox with thin provisioning and space reclaim enabled on the SAN and discarding configured across the path to trigger the UNMAP/TRIM. During the VM migration the import seems to migrate the thick size of the disk which takes longer however, will the UNMAP/TRIM occur now the VM is running on the other side with discard enabled? Additionally can you mount the same NFS share on ESXI and Proxmox at the same time and migrate that way?

Extracted from these lines

  • [comment u/_--James--_] yes, but only SAN side. LVM on the PVE side will always show fully allocated for that VM, but for SANs that support dedupe and unmap (like Nimble/Pure) youll see it there.

reddit.com/r/Proxmox/comments/1wslhxh/vmware_to_proxmoxRead the full source

Comments on the post

5 of 22 comments
  • “iSCSI + LVM = thick provisioning only. The SAN backend can do its stuff so actual consumed space is lower but as it reports on the Proxmox side it will always show the fully allocated number. Yes. This works fine in my experience using an NFS shared attached both ESXi and Proxmox as the intermediary. However the built-in Proxmox migration tool doesn't work with this solution. You'll need to hand”

    u/peakdecline19 points · Sep 28, 2026View

  • “Don't know. I am sure other people can answer, but I think Proxmox has a long way to go before I will deploy block FC/iscsi storage on it when I can use NFS instead. This should be fine. There are people that have import VMs in this way. You can use vmdk files as virtual disks for proxmox, but the original VM needs to be shut down and the vmdks have to be imported (I think?) I have been using”

    u/smellybear6668 points · Sep 28, 2026View

  • “Unfortunately proxmox doesn't seem to forward unmap/trim directly to iscsi. I think it does zero it out (not positive) deleted sectors, but that probably depends on your OS/filesystem of the vm. Yes, you can mount the same NFS share , but vmware and proxmox expect the files in different location so you have to symlink or move them. See the promox manual on manual migration. You can also use the wi”

    u/BarracudaDefiant47022 points · Sep 28, 2026View

  • “yes, but only SAN side. LVM on the PVE side will always show fully allocated for that VM, but for SANs that support dedupe and unmap (like Nimble/Pure) youll see it there. yes but PVE will mount folders for VMs, ISOs, ...etc and will not normally see the VMDK's at the same level as ESXi will. You can manually walk/map to them if your ACLs allow for it, then you can do direct VMDK->QCow2 on the s”

    u/_--James--_2 points · Sep 28, 2026View

  • “I can comment on #2 - yes. We mount the same NFS datastore on Proxmox as VMWare. Create your machine on Proxmox pointing to the NFS share, create a dummy drive in vmdk format, then edit the .vmdk file to point to the "real" -flat.vmdk file. Once it's up and running, migrate storage to the Qcow/Raw datastore in Proxmox. We're also using NetApp Shift to migrate - it does a lot of the work for you”

    u/Find-Ubu-99992 points · Sep 28, 2026View

Extracted by Autobound

From the Signal API record
Signal
Customer feedback

What this signalsUser posts often show product pain before it reaches reviews or churn.

Subreddit
r/Proxmox

Companies

  • Nimble StorageAlso named

The full record

From the Signal API record

Numbers

Mentions
1

Details

Category
Features
Virality
High
Post kind
Text
Prominence
Aside
Company's role
Vendor

Topics and mentions

Topics

  • virtualization
  • storage
  • san

Flair

  • Question

Extraction

Sentiment
Neutral
Detected
Sep 28, 2026
signal_type
reddit-company
signal_subtype
customerFeedback

Use this data

Get every Reddit signal for Pure Storage and the companies you sell to, in the tools you already use.

  1. Ask Claude about it

    Connect Autobound to Claude, Claude Code or Cursor with MCP. Then ask: “What changed at Pure Storage this week?”

  2. Send it to your own tools

    The Signal API returns Reddit signals for any list of companies as JSON, for your CRM, warehouse or app.

  3. Try it free

    Sign up and spend your free credits on the companies you sell to.

    Start Free1,000 free credits

The API returns more than this page shows

This page shows a preview. The full reddit-company record in the Signal API and MCP can also have these 8 fields. Some fields are empty for some signals.

Company

  • linkedin_urlValue in the API
  • industriesValue in the API
  • employee_count_lowValue in the API
  • employee_count_highValue in the API
  • revenueValue in the API
  • descriptionValue in the API

Signal

  • signal_nameValue in the API
  • associationValue in the API
Show the full JSONThe record on this page and the API request

GET /v1/signals/b66df80e-eabd-5025-a53a-6e55d7c00535 returns this record as JSON. POST /v1/companies/enrich returns every signal for purestorage.com.

{
  "signal_id": "b66df80e-eabd-5025-a53a-6e55d7c00535",
  "signal_type": "reddit-company",
  "signal_subtype": "customerFeedback",
  "detected_at": "2026-09-28T17:47:51+00:00",
  "company": {
    "name": "Pure Storage",
    "domain": "everpuredata.com"
  },
  "data": {
    "nsfw": false,
    "stage": "none",
    "awards": 0,
    "topics": [
      "storage",
      "san",
      "virtualization"
    ],
    "post_id": "1wslhxh",
    "summary": "A commenter notes that SANs from vendors like Pure Storage support dedupe and unmap features, relevant to a technical discussion on Proxmox migrations.",
    "category": "features",
    "comments": [
      {
        "url": "https://www.reddit.com/r/Proxmox/comments/1wslhxh/comment/pcmg0bb/",
        "depth": 0,
        "score": 19,
        "author": "peakdecline",
        "excerpt": "iSCSI + LVM = thick provisioning only. The SAN backend can do its stuff so actual consumed space is lower but as it reports on the Proxmox side it will always show the fully allocated number.\n\n Yes. This works fine in my experience using an NFS shared attached both ESXi and Proxmox as the intermediary. However the built-in Proxmox migration tool doesn't work with this solution. You'll need to hand",
        "posted_at": "2026-09-28T17:55:52.000Z",
        "author_url": "https://www.reddit.com/user/peakdecline/"
      },
      {
        "url": "https://www.reddit.com/r/Proxmox/comments/1wslhxh/comment/pcmf38h/",
        "depth": 0,
        "score": 8,
        "author": "smellybear666",
        "excerpt": "Don't know. I am sure other people can answer, but I think Proxmox has a long way to go before I will deploy block FC/iscsi storage on it when I can use NFS instead.\n\n This should be fine. There are people that have import VMs in this way. You can use vmdk files as virtual disks for proxmox, but the original VM needs to be shut down and the vmdks have to be imported (I think?)\n\n I have been using",
        "posted_at": "2026-09-28T17:52:16.000Z",
        "author_url": "https://www.reddit.com/user/smellybear666/"
      },
      {
        "url": "https://www.reddit.com/r/Proxmox/comments/1wslhxh/comment/pcmos08/",
        "depth": 0,
        "score": 2,
        "author": "BarracudaDefiant4702",
        "excerpt": "Unfortunately proxmox doesn't seem to forward unmap/trim directly to iscsi. I think it does zero it out (not positive) deleted sectors, but that probably depends on your OS/filesystem of the vm.\nYes, you can mount the same NFS share , but vmware and proxmox expect the files in different location so you have to symlink or move them. See the promox manual on manual migration. You can also use the wi",
        "posted_at": "2026-09-28T18:30:30.000Z",
        "author_url": "https://www.reddit.com/user/BarracudaDefiant4702/"
      },
      {
        "url": "https://www.reddit.com/r/Proxmox/comments/1wslhxh/comment/pcmxal4/",
        "depth": 0,
        "score": 2,
        "author": "_--James--_",
        "excerpt": "yes, but only SAN side. LVM on the PVE side will always show fully allocated for that VM, but for SANs that support dedupe and unmap (like Nimble/Pure) youll see it there.\n\n yes but PVE will mount folders for VMs, ISOs, ...etc and will not normally see the VMDK's at the same level as ESXi will. You can manually walk/map to them if your ACLs allow for it, then you can do direct VMDK->QCow2 on the s",
        "posted_at": "2026-09-28T19:04:07.000Z",
        "author_url": "https://www.reddit.com/user/_--James--_/"
      },
      {
        "url": "https://www.reddit.com/r/Proxmox/comments/1wslhxh/comment/pcn2wol/",
        "depth": 0,
        "score": 2,
        "author": "Find-Ubu-9999",
        "excerpt": "I can comment on #2 - yes. We mount the same NFS datastore on Proxmox as VMWare. Create your machine on Proxmox pointing to the NFS share, create a dummy drive in vmdk format, then edit the .vmdk file to point to the \"real\" -flat.vmdk file. Once it's up and running, migrate storage to the Qcow/Raw datastore in Proxmox.\n\n We're also using NetApp Shift to migrate - it does a lot of the work for you",
        "posted_at": "2026-09-28T19:26:19.000Z",
        "author_url": "https://www.reddit.com/user/Find-Ubu-9999/"
      },
      {
        "url": "https://www.reddit.com/r/Proxmox/comments/1wslhxh/comment/pcog779/",
        "depth": 0,
        "score": 1,
        "author": "ThecaptainWTF9",
        "excerpt": "In regards to 2.\n\n Yes, we do this.",
        "posted_at": "2026-09-28T23:00:31.000Z",
        "author_url": "https://www.reddit.com/user/ThecaptainWTF9/"
      },
      {
        "url": "https://www.reddit.com/r/Proxmox/comments/1wslhxh/comment/pcqoq72/",
        "depth": 0,
        "score": 1,
        "author": "bzed",
        "excerpt": "I guess it depends on your storage, some will compress/discard zeros right when you write them, even when they are in new data you are writing.\n\n Yes, just don't use the same export for several proxmox clusters at the same time. Make sure VMware puts -flat vmdk files on the storage, just rename them to .raw in the folder of the new proxmox vm and you can attach and boot them again.",
        "posted_at": "2026-09-29T06:55:56.000Z",
        "author_url": "https://www.reddit.com/user/bzed/"
      },
      {
        "url": "https://www.reddit.com/r/Proxmox/comments/1wslhxh/comment/pcu5u2j/",
        "depth": 0,
        "score": 1,
        "author": "luka0x73",
        "excerpt": "Hey, I just published a tool for that case. Feel free to use it! https://www.reddit.com/r/Proxmox/s/ANLPIehaI1",
        "posted_at": "2026-09-29T18:07:50.000Z",
        "author_url": "https://www.reddit.com/user/luka0x73/"
      }
    ],
    "evidence": [
      "[comment u/_--James--_] yes, but only SAN side. LVM on the PVE side will always show fully allocated for that VM, but for SANs that support dedupe and unmap (like Nimble/Pure) youll see it there."
    ],
    "virality": "high",
    "post_date": "2026-09-28T17:47:51.000Z",
    "post_kind": "text",
    "post_text": "Like a lot of people I'm currently in process of testing ESXI to Proxmox migrations using the built-in import tool which has been working great for the few test VMs migrated so far.\n\nCouple of questions:\n\nRunning ISCSI + LVM on Proxmox with thin provisioning and space reclaim enabled on the SAN and discarding configured across the path to trigger the UNMAP/TRIM. During the VM migration the import seems to migrate the thick size of the disk which takes longer however, will the UNMAP/TRIM occur now the VM is running on the other side with discard enabled?\n\nAdditionally can you mount the same NFS share on ESXI and Proxmox at the same time and migrate that way?",
    "sentiment": "neutral",
    "subreddit": "Proxmox",
    "post_flair": [
      "Question"
    ],
    "post_title": "Vmware to Proxmox",
    "prominence": "aside",
    "source_url": "https://www.reddit.com/r/Proxmox/comments/1wslhxh/vmware_to_proxmox/",
    "entity_role": "vendor",
    "post_author": "Laroemwen",
    "upvote_ratio": 0.9555555555555556,
    "mention_count": 1,
    "mention_surge": false,
    "subreddit_url": "https://www.reddit.com/r/Proxmox/",
    "total_upvotes": 41,
    "comments_total": 22,
    "total_comments": 22,
    "other_companies": [
      {
        "name": "Nimble Storage",
        "role": "alternative",
        "domain": "hpe.com"
      }
    ],
    "post_author_url": "https://www.reddit.com/user/Laroemwen/",
    "signal_category": "feedback",
    "comments_included": 12
  }
}

Long text fields are shortened on this page.

Looking up one signal by its id is free. Enrich costs 2 credits per signal returned; a call with no results is free.