Skip to main content
TraneCustomer feedback

Building automation professionals praise Trane's built-in boards and Symbio controllers for superior BACnet integration and flexibility compared to Carrier.

Source: Autobound Signal API · 58 signals tracked for Trane · updated

Get Trane's live signals in Claude or ChatGPT, or by API

AskWhat changed at Trane this week? Use Autobound signals for trane.com.

What happened

Post: "Carrier RTU/ Open Bacnet card"

Source

RedditOct 14, 2026By u/Sufficient-Big-6773

r/BuildingAutomation

Carrier RTU/ Open Bacnet card

upvotes
4
comments
9

Post

Highlighted: the lines this signal was extracted from

After getting these cards, it seems we have to build our own 10 wire whip that essentially controls the main boards outputs like a t-stat. If we want additional information we have to run seperate sensors for DAT, OAT, and enthalpy. Is there a better option or is this what it is? At least trane has a board built in and we can pull everything it see's into tridium.

Also quoted as evidence

  • [comment u/TanneriteStuffedDog] Thought we could control fans and staging through the factory controller and let the unit handle the rest (Trane Symbio has a mode for exactly this).

reddit.com/r/BuildingAutomation/comments/1x5opd8/carrier_rtu_open_bac...Read the full source

Comments on the post

5 of 9 comments
  • “RTU open is a junk product made by the worst major player in the industry. What you should be doing is using a programable controller from anyone else.”

    u/Fr33PantsForAll7 points · Oct 14, 2026View

  • “There is another part number for the harness which has pigtails for the sensors and electromechanical terminals.”

    u/leetdude4213 points · Oct 14, 2026View

  • “I always calculate enthalpy with a relative humidity sensor and a temperature sensor. You've mentioned that you hard wire an "enthalpy sensor." Who makes such a device and why would you use it instead of simply adding a humidity sensor?”

    u/OldAutomator2 points · Oct 14, 2026View

  • “What? No, you can control the entire unit over BACnet. If you don't have certain factory sensors you'll need to install them just like any other RTU that doesn't come with them. You can install your own or install the jade module with sensors and OA actuator assembly. That said I often find it easier to just control from the thermostat connections.”

    u/shadycrew311 points · Oct 14, 2026View

  • “Not related to comms, but found something else annoying about a Carrier chiller today. I asked the Carrier tech to program the common alarm relay so that it is energised when healthy (because if the supply trips to the chiller, I want the alarm relay to de-energise and send a signal to the BMS). He told me that it is not possible and that the alarm relay only energises when there is a fault. So I”

    u/HullIsNotThatBad1 points · Oct 14, 2026View

Extracted by Autobound

From the Signal API record
Signal
Customer feedback

What this signalsUser posts often show product pain before it reaches reviews or churn.

Subreddit
r/BuildingAutomation
Event date
Oct 2026

Companies

  • CarrierAlso named
  • TridiumAlso named

The full record

From the Signal API record

Numbers

Mentions
3

Details

Timing
Ongoing state
Category
Features
Virality
Medium
Post kind
Text
Prominence
Aside
Company's role
Vendor

Topics and mentions

Topics

  • building automation
  • bacnet
  • hvac
  • rtu

Products named

  • Symbio

Extraction

Sentiment
Positive
Detected
Oct 14, 2026
signal_type
reddit-company
signal_subtype
customerFeedback

Use this data

Get every Reddit signal for Trane and the companies you sell to, in the tools you already use.

  1. Ask Claude about it

    Connect Autobound to Claude, Claude Code or Cursor with MCP. Then ask: “What changed at Trane this week?”

  2. Send it to your own tools

    The Signal API returns Reddit signals for any list of companies as JSON, for your CRM, warehouse or app.

  3. Try it free

    Sign up and spend your free credits on the companies you sell to.

    Start Free1,000 free credits

The API returns more than this page shows

This page shows a preview. The full reddit-company record in the Signal API and MCP can also have these 8 fields. Some fields are empty for some signals.

Company

  • linkedin_urlValue in the API
  • industriesValue in the API
  • employee_count_lowValue in the API
  • employee_count_highValue in the API
  • revenueValue in the API
  • descriptionValue in the API

Signal

  • signal_nameValue in the API
  • associationValue in the API
Show the full JSONThe record on this page and the API request

GET /v1/signals/c30e91e3-1fe3-538b-a903-b9eff631fc9e returns this record as JSON. POST /v1/companies/enrich returns every signal for trane.com.

{
  "signal_id": "c30e91e3-1fe3-538b-a903-b9eff631fc9e",
  "signal_type": "reddit-company",
  "signal_subtype": "customerFeedback",
  "detected_at": "2026-10-14T11:26:54+00:00",
  "company": {
    "name": "Trane",
    "domain": "trane.com"
  },
  "data": {
    "nsfw": false,
    "stage": "none",
    "awards": 0,
    "timing": "ongoing_state",
    "topics": [
      "building automation",
      "bacnet",
      "hvac",
      "rtu"
    ],
    "post_id": "1x5opd8",
    "summary": "Building automation professionals praise Trane's built-in boards and Symbio controllers for superior BACnet integration and flexibility compared to Carrier.",
    "category": "features",
    "comments": [
      {
        "url": "https://www.reddit.com/r/BuildingAutomation/comments/1x5opd8/comment/pgo6ptq/",
        "depth": 0,
        "score": 7,
        "author": "Fr33PantsForAll",
        "excerpt": "RTU open is a junk product made by the worst major player in the industry. What you should be doing is using a programable controller from anyone else.",
        "posted_at": "2026-10-14T11:48:50.000Z",
        "author_url": "https://www.reddit.com/user/Fr33PantsForAll/"
      },
      {
        "url": "https://www.reddit.com/r/BuildingAutomation/comments/1x5opd8/comment/pgov7rl/",
        "depth": 0,
        "score": 3,
        "author": "leetdude421",
        "excerpt": "There is another part number for the harness which has pigtails for the sensors and electromechanical terminals.",
        "posted_at": "2026-10-14T13:53:56.000Z",
        "author_url": "https://www.reddit.com/user/leetdude421/"
      },
      {
        "url": "https://www.reddit.com/r/BuildingAutomation/comments/1x5opd8/comment/pgocqos/",
        "depth": 0,
        "score": 2,
        "author": "OldAutomator",
        "excerpt": "I always calculate enthalpy with a relative humidity sensor and a temperature sensor.\n\n You've mentioned that you hard wire an \"enthalpy sensor.\"\n\n Who makes such a device and why would you use it instead of simply adding a humidity sensor?",
        "posted_at": "2026-10-14T12:23:01.000Z",
        "author_url": "https://www.reddit.com/user/OldAutomator/"
      },
      {
        "url": "https://www.reddit.com/r/BuildingAutomation/comments/1x5opd8/comment/pgo4v0m/",
        "depth": 0,
        "score": 1,
        "author": "shadycrew31",
        "excerpt": "What? No, you can control the entire unit over BACnet. If you don't have certain factory sensors you'll need to install them just like any other RTU that doesn't come with them. You can install your own or install the jade module with sensors and OA actuator assembly.\n\n That said I often find it easier to just control from the thermostat connections.",
        "posted_at": "2026-10-14T11:37:28.000Z",
        "author_url": "https://www.reddit.com/user/shadycrew31/"
      },
      {
        "url": "https://www.reddit.com/r/BuildingAutomation/comments/1x5opd8/comment/pgov74n/",
        "depth": 0,
        "score": 1,
        "author": "HullIsNotThatBad",
        "excerpt": "Not related to comms, but found something else annoying about a Carrier chiller today. I asked the Carrier tech to program the common alarm relay so that it is energised when healthy (because if the supply trips to the chiller, I want the alarm relay to de-energise and send a signal to the BMS). He told me that it is not possible and that the alarm relay only energises when there is a fault. So I",
        "posted_at": "2026-10-14T13:53:51.000Z",
        "author_url": "https://www.reddit.com/user/HullIsNotThatBad/"
      },
      {
        "url": "https://www.reddit.com/r/BuildingAutomation/comments/1x5opd8/comment/pgtinzy/",
        "depth": 0,
        "score": 1,
        "author": "TanneriteStuffedDog",
        "excerpt": "Had to check if you were one of my guys, we’re fighting two Carrier RTUs with RTU open boards.\n\n Thought we could control fans and staging through the factory controller and let the unit handle the rest (Trane Symbio has a mode for exactly this).\n\n Nope. You can either integrate with bacnet, which FORCES a 5° minimum heat/cool setpoint difference that can only be changed with a Carrier service too",
        "posted_at": "2026-10-15T02:22:32.000Z",
        "author_url": "https://www.reddit.com/user/TanneriteStuffedDog/"
      }
    ],
    "evidence": [
      "[post] At least trane has a board built in and we can pull everything it see's into tridium.",
      "[comment u/TanneriteStuffedDog] Thought we could control fans and staging through the factory controller and let the unit handle the rest (Trane Symbio has a mode for exactly this)."
    ],
    "virality": "medium",
    "post_date": "2026-10-14T11:26:54.000Z",
    "post_kind": "text",
    "post_text": "After getting these cards, it seems we have to build our own 10 wire whip that essentially controls the main boards outputs like a t-stat. If we want additional information we have to run seperate sensors for DAT, OAT, and enthalpy. Is there a better option or is this what it is? At least trane has a board built in and we can pull everything it see's into tridium.",
    "sentiment": "positive",
    "subreddit": "BuildingAutomation",
    "event_date": "2026-10",
    "post_title": "Carrier RTU/ Open Bacnet card",
    "prominence": "aside",
    "source_url": "https://www.reddit.com/r/BuildingAutomation/comments/1x5opd8/carrier_rtu_open_bacnet_card/",
    "entity_role": "vendor",
    "post_author": "Sufficient-Big-6773",
    "upvote_ratio": 1,
    "mention_count": 3,
    "mention_surge": true,
    "subreddit_url": "https://www.reddit.com/r/BuildingAutomation/",
    "total_upvotes": 4,
    "comments_total": 9,
    "total_comments": 9,
    "other_companies": [
      {
        "name": "Carrier",
        "role": "competitor",
        "domain": "carrier.com"
      },
      {
        "name": "Tridium",
        "role": "partner",
        "domain": "tridium.com"
      }
    ],
    "post_author_url": "https://www.reddit.com/user/Sufficient-Big-6773/",
    "signal_category": "feedback",
    "comments_included": 6,
    "products_mentioned": [
      "Symbio"
    ]
  }
}

Long text fields are shortened on this page.

Looking up one signal by its id is free. Enrich costs 2 credits per signal returned; a call with no results is free.