Skip to main content
ViaviCustomer feedback

Cable technicians report persistent issues with Viavi test meters, criticizing false codeword errors and inaccurate readings when analyzing OFDM profiles in high-split environments.

Source: Autobound Signal API · 105 signals tracked for Viavi · updated

Get Viavi's live signals in Claude or ChatGPT, or by API

AskWhat changed at Viavi this week? Use Autobound signals for viavisolutions.com.

What happened

Post: "Question About Error at Tap in High Split Area"

Source

RedditOct 14, 2026By u/oflowz

r/CableTechs

Question About Error at Tap in High Split Area

upvotes
23
comments
29

Extracted from these lines

  • [comment u/Ok-Breakfast-7400] Those Viavi meters are crap when looking at ofdm profiles. We have had problems for years with them.

  • [comment u/Ok-Breakfast-7400] Company updates with a new template and makes it worse. If you can look at the history of the modem and the codewords don't line up with what the meter says, then it's a false cw error.

reddit.com/r/CableTechs/comments/1x5k6bn/question_about_error_at_tap_...Open the source

Comments on the post

5 of 29 comments
  • “Well, what your pic shows is high uncorrectables on the OFDM. The meter stuff is nonsense, but if you want to be sure, just use your soft tools (scope?) to observe the CWE rate on the modem. If it tells you the same thing your meter does, Bob's your uncle. And yes..... UCER is bad. The OFDM has different profiles that will be selected based on this metric's feedback. It starts on the higher one”

    u/Electronic-Junket-669 points · Oct 14, 2026View

  • “Highly reccomend checking out Volpefirm. I learned a lot about DOCSIS as a well as RF signaling in general from this channel. The video linked below is specific to your question. See around 33:10. https://www.youtube.com/live/fhSEi5GZeDM?is=4jWLQ3Ya_PyMlNsW”

    u/siegeginge5 points · Oct 14, 2026View

  • “It maybe an issue with the meter. You've probably already been told to change the jumpers, you can also change the barrels at the top. I had one that had been on there since the meter was new and kept giving me errors. If the NCP is that heavily errored due to a plant problem, the modems will not be able to fully lock onto the OFDMs. There would be a ton of calls from the effected areas.”

    u/jufreeman2 points · Oct 14, 2026View

  • “We had a Cisco plant that had so much noise during highsplit it’s still being cleaned up today after almost 2 yrs. Our smaller Motorola plant just went through highsplit this year and has been a breeze since we did so many V9s cleaning up noise. Highsplit is just full of fun.”

    u/Tteffomhimself2 points · Oct 14, 2026View

  • “You can scroll down and look for a box labeled something to the effect of MER variation. Click it and it'll pop up a message saying press OK for details. Press OK and it'll show the entire spectrum MER, and show if you have MER "likely LTE" affecting frequency in the OFDM range. Sometimes you'll need to wrench tighten your jumper to the tap, sometimes its legit LTE or just regular MER. A good way”

    u/LordCanti262 points · Oct 15, 2026View

Extracted by Autobound

From the Signal API record
Signal
Customer feedback

What this signalsUser posts often show product pain before it reaches reviews or churn.

Subreddit
r/CableTechs
Event date
Oct 2026

The full record

From the Signal API record

Numbers

Mentions
1

Details

Timing
Ongoing state
Category
Reliability
Link URL
i.redd.it
Virality
High
Post kind
Image
Prominence
Aside
Company's role
Vendor

Topics and mentions

Topics

  • telecom hardware
  • reliability
  • docsis
  • testing

Products named

  • Viavi meters

Extraction

Sentiment
Negative
Detected
Oct 14, 2026
signal_type
reddit-company
signal_subtype
customerFeedback

Use this data

Get every Reddit signal for Viavi and the companies you sell to, in the tools you already use.

  1. Ask Claude about it

    Connect Autobound to Claude, Claude Code or Cursor with MCP. Then ask: “What changed at Viavi this week?”

  2. Send it to your own tools

    The Signal API returns Reddit signals for any list of companies as JSON, for your CRM, warehouse or app.

  3. Try it free

    Sign up and spend your free credits on the companies you sell to.

    Start Free1,000 free credits

The API returns more than this page shows

This page shows a preview. The full reddit-company record in the Signal API and MCP can also have these 8 fields. Some fields are empty for some signals.

Company

  • linkedin_urlValue in the API
  • industriesValue in the API
  • employee_count_lowValue in the API
  • employee_count_highValue in the API
  • revenueValue in the API
  • descriptionValue in the API

Signal

  • signal_nameValue in the API
  • associationValue in the API
Show the full JSONThe record on this page and the API request

GET /v1/signals/02889c77-9f63-5b2a-a2d7-25f6018b2102 returns this record as JSON. POST /v1/companies/enrich returns every signal for viavisolutions.com.

{
  "signal_id": "02889c77-9f63-5b2a-a2d7-25f6018b2102",
  "signal_type": "reddit-company",
  "signal_subtype": "customerFeedback",
  "detected_at": "2026-10-14T06:40:31+00:00",
  "company": {
    "name": "Viavi",
    "domain": "viavisolutions.com"
  },
  "data": {
    "nsfw": false,
    "stage": "none",
    "awards": 0,
    "timing": "ongoing_state",
    "topics": [
      "telecom hardware",
      "docsis",
      "testing",
      "reliability"
    ],
    "post_id": "1x5k6bn",
    "summary": "Cable technicians report persistent issues with Viavi test meters, criticizing false codeword errors and inaccurate readings when analyzing OFDM profiles in high-split environments.",
    "category": "reliability",
    "comments": [
      {
        "url": "https://www.reddit.com/r/CableTechs/comments/1x5k6bn/comment/pgn7se1/",
        "depth": 0,
        "score": 9,
        "author": "Electronic-Junket-66",
        "excerpt": "Well, what your pic shows is high uncorrectables on the OFDM. The meter stuff is nonsense, but if you want to be sure, just use your soft tools (scope?) to observe the CWE rate on the modem. If it tells you the same thing your meter does, Bob's your uncle.\n\n And yes..... UCER is bad. The OFDM has different profiles that will be selected based on this metric's feedback. It starts on the higher one",
        "posted_at": "2026-10-14T07:21:25.000Z",
        "author_url": "https://www.reddit.com/user/Electronic-Junket-66/"
      },
      {
        "url": "https://www.reddit.com/r/CableTechs/comments/1x5k6bn/comment/pgnb1a7/",
        "depth": 0,
        "score": 5,
        "author": "siegeginge",
        "excerpt": "Highly reccomend checking out Volpefirm. I learned a lot about DOCSIS as a well as RF signaling in general from this channel. The video linked below is specific to your question. See around 33:10.\n\n https://www.youtube.com/live/fhSEi5GZeDM?is=4jWLQ3Ya_PyMlNsW",
        "posted_at": "2026-10-14T07:48:54.000Z",
        "author_url": "https://www.reddit.com/user/siegeginge/"
      },
      {
        "url": "https://www.reddit.com/r/CableTechs/comments/1x5k6bn/comment/pgodixa/",
        "depth": 0,
        "score": 2,
        "author": "jufreeman",
        "excerpt": "It maybe an issue with the meter. You've probably already been told to change the jumpers, you can also change the barrels at the top. I had one that had been on there since the meter was new and kept giving me errors. If the NCP is that heavily errored due to a plant problem, the modems will not be able to fully lock onto the OFDMs. There would be a ton of calls from the effected areas.",
        "posted_at": "2026-10-14T12:27:12.000Z",
        "author_url": "https://www.reddit.com/user/jufreeman/"
      },
      {
        "url": "https://www.reddit.com/r/CableTechs/comments/1x5k6bn/comment/pgoyqcw/",
        "depth": 0,
        "score": 2,
        "author": "Tteffomhimself",
        "excerpt": "We had a Cisco plant that had so much noise during highsplit it’s still being cleaned up today after almost 2 yrs. Our smaller Motorola plant just went through highsplit this year and has been a breeze since we did so many V9s cleaning up noise. Highsplit is just full of fun.",
        "posted_at": "2026-10-14T14:09:53.000Z",
        "author_url": "https://www.reddit.com/user/Tteffomhimself/"
      },
      {
        "url": "https://www.reddit.com/r/CableTechs/comments/1x5k6bn/comment/pgtgleb/",
        "depth": 0,
        "score": 2,
        "author": "LordCanti26",
        "excerpt": "You can scroll down and look for a box labeled something to the effect of MER variation. Click it and it'll pop up a message saying press OK for details. Press OK and it'll show the entire spectrum MER, and show if you have MER \"likely LTE\" affecting frequency in the OFDM range. Sometimes you'll need to wrench tighten your jumper to the tap, sometimes its legit LTE or just regular MER. A good way",
        "posted_at": "2026-10-15T02:11:44.000Z",
        "author_url": "https://www.reddit.com/user/LordCanti26/"
      },
      {
        "url": "https://www.reddit.com/r/CableTechs/comments/1x5k6bn/comment/pgnomfw/",
        "depth": 0,
        "score": 2,
        "author": "OutrageousWoodpecker",
        "excerpt": "NCP errors (with no PLC errors or poor MER) are often caused by ingress. At the high frequencies your photo shows, that could be something like a cell tower. There are a couple of ways to try and find the source. The quickest is to test with a meter that can show subcarrier MER, but that is probably not realistic. The second quickest is to make an antenna and use spectrum mode to see if there are",
        "posted_at": "2026-10-14T09:43:20.000Z",
        "author_url": "https://www.reddit.com/user/OutrageousWoodpecker/"
      },
      {
        "url": "https://www.reddit.com/r/CableTechs/comments/1x5k6bn/comment/pgn3t9k/",
        "depth": 0,
        "score": 1,
        "author": "SecureStill",
        "excerpt": "idk how to help you but i’m sorry. hang in there champ",
        "posted_at": "2026-10-14T06:49:27.000Z",
        "author_url": "https://www.reddit.com/user/SecureStill/"
      },
      {
        "url": "https://www.reddit.com/r/CableTechs/comments/1x5k6bn/comment/pgnmprr/",
        "depth": 0,
        "score": 1,
        "author": "BullyTX",
        "excerpt": "We went thru \"Network Evolution\" when I was a brandy-new tech and starting in the field in my area (lucky me). We had a TON of what read as failing signal that we were not able to refer up simply because it was not customer impacting.\nBottom line: take a pic, send an email, educate the customer, get them up and move on.\nFor me, it's extrememy frustrating to not have something fixed correctly. Howe",
        "posted_at": "2026-10-14T09:27:48.000Z",
        "author_url": "https://www.reddit.com/user/BullyTX/"
      }
    ],
    "evidence": [
      "[comment u/Ok-Breakfast-7400] Those Viavi meters are crap when looking at ofdm profiles. We have had problems for years with them.",
      "[comment u/Ok-Breakfast-7400] Company updates with a new template and makes it worse. If you can look at the history of the modem and the codewords don't line up with what the meter says, then it's a false cw error."
    ],
    "link_url": "https://i.redd.it/pk4do3t6pdvh1.jpeg",
    "virality": "high",
    "image_url": "https://i.redd.it/pk4do3t6pdvh1.jpeg",
    "post_date": "2026-10-14T06:40:31.000Z",
    "post_kind": "image",
    "sentiment": "negative",
    "subreddit": "CableTechs",
    "event_date": "2026-10",
    "post_title": "Question About Error at Tap in High Split Area",
    "prominence": "aside",
    "source_url": "https://www.reddit.com/r/CableTechs/comments/1x5k6bn/question_about_error_at_tap_in_high_split_area/",
    "entity_role": "vendor",
    "post_author": "oflowz",
    "upvote_ratio": 0.96,
    "mention_count": 1,
    "mention_surge": false,
    "subreddit_url": "https://www.reddit.com/r/CableTechs/",
    "total_upvotes": 23,
    "comments_total": 29,
    "total_comments": 29,
    "event_date_text": "for years",
    "post_author_url": "https://www.reddit.com/user/oflowz/",
    "signal_category": "feedback",
    "comments_included": 14,
    "products_mentioned": [
      "Viavi meters"
    ]
  }
}

Long text fields are shortened on this page.

Looking up one signal by its id is free. Enrich costs 2 credits per signal returned; a call with no results is free.